total non sense with kiwi 3p

Question

MIDI Target Manufacturer(s): Roland

hello

i need your help

the installation was done lately by professional and i m using midi editor to control the kiwi (im using it with a bluetooth midi)

when i do something on midi editor the kiwi3p just do something with no sense like changing sound, holding a note ...

where do you think the problem is ?

Adrien

Comments

Ed

Thanks for asking
I bought a midi card to get the info from the 3p. As soon as I get it I ll tell you the message I got   

Adrien

---

Ed

midi card is here.
which app do you recommend to hear from the 3P ? (for mac - the easiest !)

in midi designer where can i get the message in ?

Adrien

---

Hi Adrien!

Wich MIDI interface did you buy? (just to know)
As a MIDI monitor for OS X, I can recommend Snoize MIDI Monitor.
In MD you can use the Log Pane to display MIDI signals going in and out : https://mididesigner.com/wiki/doku.php/manual:chapter-troubleshooting#log_pane

Ed.

---

Ed

I use tascam iu2
It seems I don t receive anything on snoize
Not even in the log pane. (I can see the out but no in)

Midi cc enable was checked also.

Ad

---

Hi Adrien!

At this point, I think our research so far points on the MIDI settings on your kiwi 3P.
- Are you using the latest firmware version? (from the JX-3P Upgrade, just to be sure we are reading the same manual)
- Have you tried different positions with the external selector switch?
- Are you able to establish connection using any other software (kiwi editor, MIDI Quest 12, etc)
This may seem obvious, but also check the MIDI connections In>Out, Out>In, cables, etc..

By the way, are you using/have you tried this layout? (its was made to program the KIWI-3P from the iPad):
https://mididesigner.com/qa/171/roland-with-organix-and-kiwitechnics-update-mks-jx-8p-mks-70

Ed.